top of page

Back to Cable and Accessories

The Spirit MKII (Junction Box)

OFHC SILVER PLATED   TONEARM CABLE

 

The design philosophy behind the Spirit tonearm cable is simple and direct; Engineering Know-how, quality construction, and no compromise when it comes to the materials used. This is “no off the shelf” modified audio cable but actually a cable that was solely engineered for use with the finest tonearms from the past, the present and the future.

The Spirit has the ability to attain and retain the actual presentation and feeling of the performance with a warmth and a clarity that defines each instrument and all its intricacies while portraying vocals in the correct level and depth. rich, vibrant, accurate, and a great upgrade to any system.

 

The Spirit  like all of our cables  goes through our new Ultra Sonic cleaning process where we run the raw copper through a water bath that is super charged to burn away dirt, oil, particals and impurities on the surface of the wire. This Ultra Sonic Bath also has the added unique effect of giving our cables a pre-burn sound that could take hundreds of hours to achieve through normal use. 

 

SPECIFICATION CABLE

 

  • Conductor: OFHC SILVER   Conductors, tight pitch construction. low capacitance, shielded

  • Insulations: PE dielectric, PTFE dielectric, ­Nylon sleeve,  80ºC  PVC jacket

  • Shield: Aluminum mylar with silver coated copper tight pitch spiral

  • Ground: 50cm OFC ground wire with 24k gold plated Pure Copper ground clips

  • Connector Female (DIN): ZV88 straight or TAD-3R right angle DIN, 24k gold plated high purity copper insulated in PTFE/Tef utilizing 1877 anti-stress pin construction.

  • Sleeve 1: Polyethylene terephthalate(PET) monofilament sleeve combined with high tension abraision resistent nylon 

  • Solder Joints: 8% Pure Silver and copper formulation 

SPECIFICATION JUNCTION

 

  • Hand assembled real oak  enclosure. 

  • Shield: Aluminum mylar grounding shield cage 

  • High density (3mm) anti-vibration silca acoustic putty lined walls.

  • Direct wired from DIN to female RCA's and ground connector

  • Connector Female (RCA): High Purity OFHC copper insulated in PTFE/Tef  24k gold plated

  • Solder Joints: 8% Pure Silver and copper formulation 

  • Version 1- Straight Din, Version-2 90ºDin

  • Fits the majority vintage and mondern tonearms that use a detachable 5-Pin DIN connector cable.

bottom of page